Accessories Shop

Welcome to our new ‘Accessories Shop’ page!

All the products on this page are available for online purchase. If you are buying hat blocks as well as accessories, please use the ‘Add to Quote’ buttons on the main website.

Accessories Pack

accessoriespack

£70.00

This is a very handy pack of accessories comprising BS1 block stand, BSPR blocking spring, 4 x BP1 blocking pins, 20m spring steel wire plus connectors, 5m of blocking string and a CS1 corset stay/millinery knife.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £58.33

Category:

Tools Pack

toolspack

£26.00

A handy pack of tools comprising 1 pack of 5 disposable brushes, 1 pair of pliers, 1 pair of self locking pliers and 1 pin pusher.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £21.67

Category:

Accessories & Tools Pack

accessoriesandtoolspack

£90.00

Both the above packs combined with even more discount!

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £75

Category:

BS1 – Block Stand

BS1 - Block Stand

£29.00

A simple stand for use while working on a block. Height 200mm, post diameter 25mm.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £24.17

Category:

BS2 Block Spinner

bs2
BS2 Block spinner with a GMB block

£49.00

A traditional wooden block spinner – can be useful for old vintage blocks where the stand hole varies in diameter to our standard. The peg is 25mm diameter so as long as the hole in the block is bigger than that then it will fit fine. The advantage of this type of spinner is that with the short peg, the block sits on the flat surface so the depth of the hole in the block is also not important. They also look great as a display stand for your beautiful Guy Morse-Brown Blocks!

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £40.83

Category:

A blocking spring is a very useful millinery tool. It is an old idea which we have updated. Our durable plastic springs enable you to block a crown more easily with fewer pins and in less time than using pins alone. A blocking spring is particularly helpful when blocking sinamay. Holding the squares of sinamay in the correct position on the block while you pull and pin can be difficult but the spring will hold the sinamay securely in place while you distribute the extra material at the corners of the square. This method gives a neater result with much less effort than when using pins alone and also means you use far fewer pins. Springs come in all sizes to accommodate your different crown blocks and come with instructions for use. Please say which size you require, bearing in mind that the spring needs to match the head size of the block you’ll use it with.

BSPR – Blocking Spring

BSPR - Blocking Spring
BSPR - Blocking SpringBSPR - on a block

£15.00

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £12.50

Category:

BP1 – Blocking Pins

bp1

£4.35

Pinning the fabric to the block can be hard on the fingers. But not any more! Our blocking pins have large plastic heads, making it easy to push them in and take them out again. The pins are the same gauge as dressmaker's pins and will bend rather than break. Kinder to your fingers and to your block. Far superior to both chart pins and drawing pins.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £3.63

Category:

BP1 – Blocking Pins 10 pack

bp1

£39.00

10 boxes for the price of 9.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £32.50

Category:

Ladies Fur Felt Cones

Cones
Fur Felt Cone on headLadies-felts-colour-chart

£22.95

As with all out products, we only supply the best quality available and these are no exception. Beautiful, plain fur felts which are lightly pre-stiffened and available in 10 colours shown in the colour chart. Matching petersham ribbons in 38mm and 16mm widths are also available.

Ex VAT £19.12

Clear
SKU: N/A Category:

Ladies Fur Felt Capelines

Ladies-fur-felt-capelines
Ladies-felts-colour-chartCapeline

£27.95

As with all out products, we only supply the best quality available and these are no exception. Beautiful, plain fur felts which are lightly pre-stiffened and available in 10 colours shown in the colour chart. Matching petersham ribbons in 38mm and 16mm widths are also available.

Ex VAT £23.29

Clear
SKU: N/A Category:

Men’s Fur Felt Hat Bodies

Men's-Felts
Men's-Fur-felt-BodyMen's-felts-colour-chart3

£33.95

As with all out products, we only supply the best quality available and these are no exception. These men's fur felt bodies are a heavier felt and come with extra stiffening making them perfect for fedora's, trilby's, homburgs etc. Brim width 85mm. Available in four colours shown in the colour chart. Matching petersham ribbons in 38mm and 16mm widths are also available.

Ex VAT £28.29

Clear
SKU: N/A Category:

16mm Petersham Ribbon

16mm Ribbons
Wide-ribbon-colour-chart

£4.20

High quality petersham ribbon, 16mm (5/8″) wide and available in 13 different colours to match both our men's and ladies fur felts. Sold in 5 meter lengths.
Manufactured in England!

Ex VAT £3.50

Clear
SKU: N/A Category:

38mm Petersham Ribbon

Wide-Ribbons
Wide-ribbon-colour-chart

£7.95

High quality petersham ribbon, 38mm (1.5″) wide and available in 13 different colours to match both our men's and ladies fur felts. Sold in 5 meter lengths.
Manufactured in England!

Ex VAT £6.62

Clear
SKU: N/A Category:

Leather Sweatband – Black or Brown

Guy Morse-Brown Hat Bands & Ribbons
Guy Morse-Brown Hat Bands & Ribbons

£5.99

High quality leather sweatbands – 41mm (1 5/8″) wide by 660mm (26″) long, split leather with black empire tape and reed. Ready to sew into your men’s hats. Available in black or brown.

Ex Vat £4.99

Clear
SKU: N/A Category:

Satin Sweatband – Black or Dark Brown

Guy Morse-Brown Hat Bands & Ribbons
Guy Morse-Brown Hat Bands & Ribbons

£3.99

High quality fabric sweatbands – 32mm (1 1/4″) wide by 660mm (26″) long, black satin tape and reed. Ready to sew into your men’s hats.

Ex Vat £3.32

Clear
SKU: N/A Category:

Sweatband Bow – Brown or White

Guy Morse-Brown Hat Bands & Ribbons
Guy Morse-Brown Hat Bands & RibbonsGuy Morse-Brown Hat Bands & Ribbons

£1.99

 

Pack of 5 brown sweatband bows.

Ex VAT £1.65

Clear
SKU: N/A Category:

DM Pins – Prym Dressmaker Pins

Dressmaker Pins 30 x 0.60mm

£3.30

Prym Narrow Gauage Dressmakers Pins: Hardened and Polished Steel – Size 30 x 0.60 mm – 25 g

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £2.75

Category:

NEED – Prym Millinery Needles

Millinery needles

£1.50

Millinery Needles HT 5-10 silver colour with gold eye assorted

Ex VAT £1.25

If you are not ordering blocks as well, this product can be purchased in our online shop.

Category:

GH Pins – Prym Glass-headed pins

Glass headed pins

£2.50

Glass-headed pins 30 x 0.60 silver colour

Ex VAT £2.08

If you are not ordering blocks as well, this product can be purchased in our online shop.

Category:

TH – Prym Thimble

Thimble 17mm

Thimble zinc die-cast silver colour available in 14mm, 16mm or 17mm

Ex VAT £1.46

If you are not ordering blocks as well, this product can be purchased in our online shop.

Clear
SKU: N/A Category:

TAPE – Prym Tape Measure

Tape measure

£2.50

Prym Tape Measures Colour 150cm / 60″

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £2.08

Category:

CS1 – Millinery Knife/Corset Stay

CS1 Millinery Knife

£4.35

A corset stay – the type which looks like a flattened wire spring – is ideal for taking a blocked crown or brim off a hat block after stiffening and drying! They have smooth ends, which will not damage the hat fabric. Corset stays bend in all directions yet remain stiff. This means that they can be inserted between the cling film covering the block and the hat fabric and moved up and down to loosen it and enable you to take your blocked shape off without damaging it. (Approximate length 30cm). Very helpful indeed!

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £3.63

Category:

PP1 – Pin Pusher

pp1

£13.99

Pin Pushers are ingenious tools. They have a place among the astute milliner’s tool kit and are in fact indispensable in some blocking situations. The pin pusher’s wooden handle fits comfortably into the hand and the metal tube into which the dressmaker’s pin is dropped, head first, has a magnet at the bottom. This holds the pin inside so that it does not fall out, whatever the angle of the tool. Dressmaker’s pins are hard to press into wooden blocks by hand and a thimble can be awkward to use, as it easily slips off the pinhead. A pin pusher gives you extra mechanical power!

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £11.66

Category:

Pliers

Pliers

£4.99

A handy pair of pliers for removing dressmaker's pins from your block (120mm total length). Also useful for cutting wire.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £4.16

Category:

Disposable Brushes (Pack of 5)

brushes

£2.75

A handy pack of 5 1″ disposable brushes for use with various stiffeners.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £2.29

Category:

Spring Steel Wire + Connectors

ssw

£10.99

21 guage spring steel wire for brims. Sold in approximately 20 metre lengths and including a pack of 25 stainless steel connectors. Can be cut with the small pliers above.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £9.16

Category:

Self Locking Pliers

slply

£7.50

Self locking pliers for closing the connecters onto the wire.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £6.25

Category:

Blocking String

string

£1.99

Great for string grooves and crown bases. 2mm diameter and sold in 5 metre lengths.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £1.66

Category:

Runner Down

runner-down-(1)
runner-down-(2)

£39.00

A runner down is a very handy tool used to push your string down the blocked crown into the corner between crown and brim. This could be on a cloche block or any crown/brim combination where you need a well defined line between crown and brim. They can also be used to push the string into a string groove so that you have as much felt available to create the welt. Made from stainless steel with a hard wood handle.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £32.50

 

Category:

Stainless Steel Egg Iron

Stainless Steel Egg Iron
Stainless Steel Egg Iron

£75.00

An egg iron is used for helping to shape and smooth felt into hollow areas of a block such as a trilby or fedora. Our egg irons are of superior quality being made of stainless steel that will not rust or corrode, giving you years of trouble and maintenance free service. Simply warm the egg in a flame such as your kitchen hob or portable stove and away you go. You'll find it invaluable for use with trilby dimples and valleys but the pointed end (which isn't sharp) will also fit well into sharper valleys such as pork pies.

STAINLESS STEEL MEANS RUST FREE – NO MORE MARKS ON YOUR FELT. NOT YOUR AVERAGE EGG IRON!

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £62.50

Category:

Brim Cutting Wheels

brim-cutting-wheels

£98.00

This is our version of a brim cutter which is used for neatly cutting a flat felt brim to width. The set includes 17 wheels allowing you to cut widths from 1 to 5 inches in 1/4″ increments. For best results work on a cutting mat or board. The wheel is laid on the felt width it’s edge against the base of the crown and the small central wheel is placed in the centre and a scalpel (not included) is inserted in the slot and pressed down into the cutting mat or board. Keeping a little pressure against the side of the crown, the crown is rotated once to cut the felt off to width.

Ex Vat £81.66

Category:

Flower Making Tools – Full set

full-set

£149.00

Like all of our products we aim for the highest quality available and these flower tools are no exception. From the beautiful ball shaped hardwood handles to the polished stainless steel tool itself, you will find these flower tools a pleasure to use. The stainless steel is polished and is very smooth in use on the silk, it will not rust or tarnish and it has better heat retention than either brass or steel meaning you can work for longer without re heating as often.

Please note: do not confuse these with ‘steel’ tools, ours are not steel but ‘stainless’ steel which is a very different material. Steel tools easily rust and tarnish and the surface subsequently looses its smooth finish making general use difficult. This will not happen with ours!

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £124.16

Category:

Flower Making Tools – Small Set

small-set

£79.00

A smaller set of our flower making tools – a £12 saving on buying the tools individually. Knife (veining tool), curved point (rat tail), 15mm ball and 30mm ball.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £65.83

Category:

Flower Making Tool – 10mm Ball

10mm-bal

£17.00

Ex VAT £14.16

Category:

Flower Making Tool – 15mm Ball

15mm-ball

£18.00

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £15

Category:

Flower Making Tool – 20mm Ball

20mm-ball

£20.00

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £16.66

Category:

Flower Making Tool – 30mm Ball

30mm-ball

£25.00

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £20.83

Category:

Flower Making Tool – 40mm Ball

40mm-ball

£29.00

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £24.16

Category:

Flower Making Tool – Straight Point

point

£18.00

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £15.00

Category:

Flower Making Tool – Knife

knife

£30.00

This is not a sharp tool despite the name but has a rounded edge for veining.

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £25.00

Category:

Flower Making Tool – Curved Point (Rat Tail)

rat-tail

£18.00

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £15

Category:

HC1 – Hat Cover

hc1

£1.99

Beautiful, expensive hats need protection! When an umbrella isn’t to hand and is awkward to carry, the answer is a hat cover, discreetly hidden in your handbag and ready to be unfolded at a moment’s notice if rain should threaten. Your hat will be protected for the time it takes to reach shelter, when the hat cover is just as easily and quickly folded again and returned to it’s handy pouch. Can you afford to be without one? Freebies for your customers perhaps!

If you are not ordering blocks as well, this product can be purchased in our online shop.

Ex VAT £1.66 – call for discounts on bigger quantities.

Category: